|
Roll-In Docks |
|
|
|
|
 |
 |
|
View Manufacturer's Brochure-Hewitt Roll A Dock |
| Roll-A-Dock is
simply the fastest and easiest way to get full enjoyment from your
waterfront property. In cold climates, there’s no need to endure frigid
water – just roll it in and you’re ready for action. Roll-A-Dock is ideally
suited to gradual slopes and works equally well on soft or rocky bottoms. A
basic dock can be easily placed with a vehicle or installed in a matter of
minutes by as few as two people.
Since 1971, Roll-A-Dock has set the standards for portable dock design. |
| |
 |
| With the strength of
its design, Roll-A-Dock can be extended to virtually any length you need.
The basic starter unit is a 16’ long wheel-end assembly. 4', 8' and 16'
add-on sections can be connected to make a single free-span dock up to 48'
long. For greater lengths, simply install a dock hinge and continue adding
sections, wheel kits and supports. Ramps, triangular sections and side
sections are also available to complete your installation. Roll-A-Dock will
provide a lifetime of service. All-aluminum frames, galvanized steel frames
and all other components have been designed for low maintenance and superior
resistance to corrosion. |
| |
| Hewitt Roll-A-Dock
offers a variety of configuration possibilities to suit almost any
application. (Not all configurations are legal in Wisconsin.) |
 |
| |
|
 |
Double Bracing
Roll-A-Dock’s unique “V” type bracing reduces the clear span on a 32'
dock to only 21'. This design gives the wheel assembly superior
strength both front and rear and assures maximum stability on soft or
rocky bottoms. |
 |
Double Strength
Connections
With Roll-A-Dock’s exclusive connecting system, there is no loss of
strength, even at the joints. The integrity of this design makes it
possible to have a steel frame dock up to 32' in length that requires
no extra supports |
 |
Bridged Framework
The Roll-A-Dock tapered frame incorporates design principles proven in
bridge and rafter construction. This design provides maximum strength
with a minimum of weight. The open sides of the frame also improve
stability by reducing wave resistance. |
 |
Inboard Mounted
Winch and Cable
The height adjusting winch and cable is located inside the dock frame
for greater safety. There are no exposed parts to snag – nothing to
damage your boat when you pull along side. |
 |
Winch Operation
The height adjusting winch is operated with a removable hand crank
that is inserted in an opening in the deck surface. Height adjustments
can be made while standing on the deck. |
| |
|
|
|
|
 |
|
|
|
| The ultimate dock
system, Porta-Dock roll-in (rolling) docks are the perfect solution for your
lake home or cabin. Providing unmatched in-and-out-of the water capability,
aluminum roll-in docks install with minimal effort, and offer such features
as removable, custom fit aluminum or cedar panel decking. |
 |
| All aluminum frame
roll-in docks are available in 4' and 5' widths and come standard with a
dual-winch system for easy leveling, wheels, full-width 2" galvanized axle,
and cross chains for greater stability. |
 |
 |
 |
| Beige
Aluminum Decking |
White
Aluminum Decking |
Cedar
Decking |
|
|
|
- Constructed of high quality marine alloy
aluminum for maximum strength and durability.
|
- Aluminum is completely rust proof and
corrosion resistant. Weather or ultraviolet rays do not effect it.
|
- Top-of-the-line quality framework.
|
- The interlocking aluminum deck design and
the thickness of the aluminum make this the sturdiest decking on the
market.
|
- Truss rods are used the full length for
maximum strength.
|
- Vertical lift members are constructed of
aluminum and include a molded pulley cover.
|
- Features a high solids epoxy oven-baked
white or beige enamel finish textured for skid resistance and your safety.
|
- Cedar decking offers elegance and superior
quality. Panels are assembled with waterproof glue and rim shank nails for
maximum strength.
|
|
|
